|
|
| SYSTEM REQUIREMENTS | stereo-link DACs do not require installation of special drivers, and will work with any computer operating system that supports USB audio |
| Windows: | USB 1.1 or 2.0 port (either built-in or expansion card), All versions of Windows from 98SE through Vista |
| Macintosh: | iMac, iBook, Powerbook, G3/G4/G5 and newer models running Mac OS 9.0.4 or newer (older Mac models require a built-in USB port) |
| Linux: | Kernel versions 2.4.x and higher - see our Support Page for details. |
| DIMENSIONS: | 12.5" wide × 8.25" deep × 3.5" high |
| INPUT: | USB (1.1 or 2.0) |
| Digital to Analog Converter: | 20 bits (16 or 24 bit digital path from computer) |
| Supported Sampling Rates: | 5–55kHz (automatically adapts to program material) |
| LINE OUTPUT (stereo): | Neutrik CA-NF2 RCA Jacks - electrically isolated |
| Output level (full-scale): | 2.0 V RMS into 600 ohm and higher (CD standard) |
| Output Impedance: | < 2.0 ohms |
| Output Slew rate: | 20V/usec (typ) |
| THD+N: |
|
| IMD: |
|
| Noise Floor - Digital Silence: |
|
| Hum & Buzz: | < -100dB re Full Scale |
| Frequency Response: | -1.0 db @ 9 Hz, minimal 2nd order low pass filter -2.5 dB at 21 kHz |
| Special Features: | PC based control of Volume, Balance, Mute, Bass & Treble |
| HEADPHONE OUTPUT (stereo): | Neutrik 1/4" Phone jack - electrically isolated |
| Frequency Response: |
|
| THD+N vs Output Power: |
|
| POWER REQUIREMENTS | |
| US/Canada: | 120V AC/60 Hz |
| Japan: | 100V AC/50–60 Hz |
| Elsewhere: | 220-240V 50 or 60 Hz |
| Includes: | Premium Belkin Pure-AV USB 2.0 cable – 12ft |
| Optional: | StudioSeries Audio Interconnects - 2 to 25 meters
USB Active Extension - 5 meters |
| Limited warranty: | One year parts & labor (in factory) 15 Day money back guarantee |
For information on discontinued models 1200/1300 & 1400, see the Legacy Products page.
THIS PAGE IS CURRENTLY BEING UPDATED
Last updated July 12, 2009
